• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Reasons Your fiat 500x key not detected 500 Key Fob Won't Work

A key fob with the fiat 500 car key 500 number is a convenient way to open the doors and begin the car. However, there are a variety of reasons why the fob won't be functioning. This includes a dead battery or water damage, issues with the receiver module, and interference.

This listing is for an new fiat key replacement fiat panda key fob Replacement Flip Key Remote that is similar to the Ilco brand. It needs to be professionally programmed (click here to find local locksmiths for automotive locksmiths). Includes lock, unlock, and trunk buttons.

Dead Coin Battery

The most common reason your 500 key fob will not function is a dead battery. Modern key fobs have a very limited range of operation, and should be within just a few feet of the car to operate. If you are far from your vehicle and you press the key fob button the car won't respond and will display the "Key Fob Not Detected" message in the instrument cluster.

If this happens, replace the battery of your coin cell (Part number CR2032) with a fresh one from a reliable brand like Panasonic, Duracell, or Energizer. They are usually available at your local hardware store or on the internet.

You can test the battery of your coin-cell by pressing the buttons while you are standing close to your fiat key replacement near me 500. The parking lights will flash and the key fob should operate the lock and unlock switches.

If your key fob still isn't working after replacing the battery, it may be water damage which is preventing it from connecting to the module inside your vehicle. Water damage can happen through a variety of methods, including an easy splash or submerging the key fob into saltwater at the beach. If you suspect your fob was exposed to water, put it in a dry rice bag to pull the moisture out. If this fails, you'll need to have the fob reprogrammed either by an auto locksmith or a dealer.

Water Damage

While the fob comes with rubber seals that keep water out of the electronic chip inside and out of the ocean or washing it in a machine could cause water damage. Saltwater is particularly dangerous to the circuit board of the fob and can cause it to short out and eventually end up dying. If you get the fob wet, it's not an ideal idea but if you drop it in a glass of water or forget to take it out of your pants pocket before running the washer, don't give up hope.

Remove the battery first. Clean the electronic chip with isopropyl ethanol or a similar product and dry it completely before replacing the battery. Then check the fob to see if it works. If the key still doesn't work, it might need to be programmed again. This is usually handled by an auto locksmith or dealer.

If the key is more recent and has not been programmed to your vehicle it is likely to need to be replaced completely. This is a simple procedure which can be accomplished by a professional automotive locksmith. The locksmith will need the key to be cut to match your car's ignition. They will also need to reprogram the fob in the car's system. This is a quick and cost-effective process that can usually be completed the next day.

Receiver Module Issues

The 500 key fob could stop working because it is out of range. The remote has a range of 30 feet, which means should you be too far from your car it won't be able to respond to your commands. It is possible to fix this by moving the remote closer to your vehicle until it responds.

If you've replaced the battery on your coin (commonly known as a "button" or "watch") and the fob won't work, it could have an internal circuit board problem. In the majority of cases, reprogramming your fob will solve the issue. You can find directions on how to do this for all automobiles by searching YouTube or reading the owner's manual.

You may have to replace the metal retaining clips that keep the coin battery. If they lose tension, it could hinder the battery from sitting properly and result in the malfunction of your remote.

In rare cases it is possible that the fob will become disconnected from your vehicle because of software or hardware issues. You can fix this issue by visiting your local auto-locksmith or dealer to reprogram your key fob. In certain instances it is possible that the software will require reinstallation in your body control modules.

Interference

Interference can also cause the key fob to be unable to receive or transmit an signal. This is possible when the key fob is near an electronic radio transmitter (cell phones, radar detectors) or any other source of electromagnetic radiation. The key fob may not function because of a problem to the buttons, water damage or damage to the internal chips.

If your key fob suddenly stopped working, or if you've tried everything at home to fix it (e.g. replacing the battery, reprogramming, and using the spare fiat key case replacement fob, you may have a damaged receiver module on your 500. The receiver module is located under the dash and is able to pick up the radio frequency signals from the key fob. It converts the signals into electronic commands that are then read by the vehicle.

Fortunately, there's an easy method to reset every single system on board in your 500 keys, including the key fob. Disconnect the battery for 15 minutes by taking off first the negative cable and then the positive cable. Then reconnect the battery. This will get rid of any remaining electrical charge and restart the car's computers, which could help get your key fob working again. If the issue continues it is recommended that you consult a certified technician. They'll be able determine the root of your problem.