• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Through a TCS throttle such because the UWT-100, you may view and modify roster knowledge for any locomotive at any time. Additionally, a assist feature is accessible on all TCS throttles, enabling the engineer to view a listing of all functions on the throttle show, and displaying upon every function button press the matching function. This part will make it easier to diagnose some widespread issues utilizing the Status LED's as described above. Additionally, each the person and TCS help can use these LEDs in order to Troubleshoot points. With a purpose to create a new database entry for a locomotive, you first need to make use of a throttle to enter its handle. Consists may be created by any LCC throttle (such as the UWT-100, UWT-50, LT-50 or T-50 throttles by TCS). Some throttles such because the TCS UWT-100, in addition to NCE throttles with an LCD display, have the ability to present an inventory of doable locomotive names primarily based on a search. A new window will appear which shows all the "nodes" in your LCC network, which is able to embody trains and consists within the operational memory of the system, in addition to any linked LCC throttles, boosters, and different LCC equipment. This setting impacts each the sign despatched out on the Track A/B connector as effectively because the signal despatched over the LCC cable (if enabled).

This setting controls whether or not or not the RailCom cutout will probably be created by the CS-105 and included in the DCC packet stream. 1. RailCom Cutout This setting effectively will control if RailCom is On or Off. In this mode if F0 is ON, only the "rear" facing headlight will come on and the "front" headlight going through the consist will remain off all the time. In this mode, if F0 is ON, solely the "front" going through headlight will come on and the "rear" headlight dealing with the consist will stay off all the time. If there's a locomotive on the track and there is a good connection, the command station will carry out a sequence of learn operations so as to determine the current address(es) of the decoder. If you wish to be in a position to test a decoder on tackle 3 before reprogramming its tackle, you should leave deal with three out of your saved roster. For that reason, we also advocate never assigning brief tackle 3 to a roster entry.

Short stubs may be used, but should ideally be used sparingly and stored underneath 6 toes or 2 meters. 1. Firstly, you might select to change the "WiFi Mode" from ‘Access Point’ to ‘Client’ ! In this case, utilizing the default WiFi title and Password may expose your format to undesirable tampering or cross-speak with throttles and command stations using the identical configuration. The database can be used to affiliate an arbitrary DCC address to a particular locomotive identify that will be displayed on the throttle. You have to be seeing both the CS-105 and the UWT throttle in the record. Press the "Add" button after getting into a brand new SSID and password to add it to the list of profiles. A momentary perform is lively on the locomotive so lengthy because the respective throttle button is held down, and turned off when the button is launched. Set IP Address on the throttle to fix it to your JMRI computer’s IP deal with. If you need to connect JMRI by the online Interface, use the directions above to determine the IP address of the CS-105.

Full Instructions with footage on the best way to replace your CS-105 via TCS DEPOT might be discovered on the TCS Website. RailCom is a bi-directional information communications know-how found within the NMRA Recommended Practices RP S-9.3.1 and S-9.3.2. RailCom permits bi-directional communication between the command station and decoders, not like in conventional DCC where the communication is finished exclusively in a single route (from the Command Station to the Decoder). For those who program a DCC decoder in OPS mode on the primary which does support RailCom®, the decoder has the ability to offer suggestions to the command station which acknowledges that a programming command has successfully accomplished. For example, using RailCom permits for real-time learn-again of CVs while programming on the mainline. For instance, the database can keep observe of what DCC perform numbers correspond to a given feature resembling bell or whistle. This entry will exist solely till the system powers down, whether or not or not it's ever given any commands. Once in the Roster Settings menu, you will be presented with all the options for the loco. The CS-105 stores settings about every DCC (and M/M) deal with, referred to as the Roster Settings. This is named antenna variety, and it provides multiple redundant and numerous paths for the wireless signal.