• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Why You Need a Ghost 2 Immobiliser Fitting Near Me

Modern day thieves can rob vehicles in just a minute. They use the cars OBD port to hack into the ECU & then duplicate a key, all from an unnoticed laptop inside the car.

The Autowatch Ghost immobiliser prevents this by sending pin codes to the buttons on your vehicle (steering wheels & central console). It is completely undetectable to anyone in your car.

There are no key fobs or LED indicators or other means of locating the vehicle are accessible.

The ghost immobiliser is the most effective method to protect against keyless entry theft and key copying. This device shields your vehicle from these kinds of attacks by preventing the engine from running after a valid pin code has been entered. This is an extremely effective method of safeguarding your car, and even insurance companies see it as a security measure that could help lower the cost of your insurance.

The way in which the ghost works is by connecting to your vehicles CAN data network. Once installed by us at Car Theft Solutions it will only begin when you press the exact sequence of buttons using your unique override code. The engine will not start when you attempt to start your vehicle without using the code. The thief then realizes that they have been taken prisoner and will likely leave the vehicle.

One of the big advantages of this system is that it doesn't transmit any signals like a tracker, this means that thieves are unable to use RF signal receivers to locate your Ghost device. It also does not transmit any IR (infrared) signals, like the standard remote key fobs to control the device or tracker do, making it extremely difficult to deceive or hack.

The ghost vehicle immobiliser (library.vu.edu.pk) also has a valet-mode that can be activated when you are handing your vehicle to valet to park or service. The immobiliser will be disabled CAN for 30 mph and allow you to use your vehicle just as normal by with your key fob. The Ghost will function fully when the vehicle is returned to its parked position.

If you would like to find out more about the ghost or want us to install it in your vehicle, contact us at Car Theft Solutions today. We are a family-run business with more than 10 years' experience in security for vehicles. This includes the Ghost immobiliser installation. We are a Thatcham approved installer of Ghost products and have built our brand on the basis of customer satisfaction.

No hacking or cloning

The Autowatch Ghost is one of the most advanced immobilisers on the market, it protects your vehicle from key cloning or hacking making it virtually impossible to take. The only way that a burglar could take your vehicle is physically towing it away. Even then, they won't be able to start the engine.

This is because, unlike other immobilisers that stop the car from starting if they do not have your fob, this clever system actually disconnects your engine control unit so that the vehicle can't start. It works by transmitting a signal via buttons on your steering wheel or door panel, or on your central console that can only be deactivated by entering the correct pin code configuration It is this feature that makes the Ghost impossible to break.

Its sleek and discreet design allows it to be seamlessly into your vehicle without the requirement for additional keys or LED indicators. It functions independently of the factory tracker or alarm. It also functions as a CAN bus immobiliser meaning that it is part of the control area network of your vehicle and doesn't interfere with any other devices such as the built-in key fob or alarm.

In contrast to other systems that depend on code grabbing or RF scanning the Ghost's unique technology is undetectable to thieves since it sends an inaudible sequence of pin codes through the buttons that are already present on your vehicle's steering wheel and door panels as well as the central console. The Ghost is a revolutionary device that defends your vehicle from keyless entry and smart key theft by producing an individual, unique pin code which must be entered in order to disable it.

With the growing number of keyless entry cars that are on the road the thieves are becoming more sophisticated and utilizing cloning devices that can be bought on the internet or in the classifieds for less than PS15. The cloned key fob could be used to gain access to the vehicle. The standard immobiliser will stop the car from starting if the person who stole it has your original key fob. It's not enough protection and it's very easy for criminals to jam or fake signals to unlock your vehicle.

Valet mode

A standard immobiliser fitted to your vehicle has an electronic chip that sends a signal when you press your key fob button. The system will then search for that specific code sent from the key to start the car. If the signal is not able to be detected the system will cut off the power and stop the vehicle from starting. This is the basic principle behind all aftermarket immobilisers and is a crucial security measure to ensure that your car isn't stolen even if someone else has your keys or a device to increase the signal from your key fob.

But a ghost tracker installation immobiliser doesn't only stop that but it also goes a step further. The system, which is on the CAN bus of your Mercedes, is programmed with a unique PIN code that has to be entered to start the vehicle. This is then locked in your app, and only anyone else will be able to access it without having the same pin that you have.

The system also stops hacking, cloning, and signal jamming (which could be used by thieves to bypass the immobiliser on your vehicle). This means that if a burglar does manage to get your car keys or key fob, they will not be capable of starting your car even if they're parked within only a few feet of it. The only way to get your car away would be to physically take it away on an oversized lorry that has a flatbed which is extremely unlikely.

Valet mode comes as a standard feature with your local ghost immobiliser installer immobiliser. When activated, the glove box and trunk of your vehicle will be locked. This means that anyone trying to steal your car won't have anything personal to take. It will also limit the speed of your Tesla so that it is not able to be driven over 70mph. It also will disable ludicrous modes. It will also hide your work and home addresses as well as lock your driver profiles, and lock your Tesla dashboard so that no one else is able to access your private information.

If you would like to use your car as valet parking, or service, select the 'Valet/Service' mode in the dashboard app. Enter your 4-digit valet code on the touchscreen. After you've done this, the alarm functions will be disabled, but it will still hinder the ability to start your car without a valid pin entered. This is ideal for those who have to hand their vehicle over to others for repair, such as taxi drivers or garage mechanics.

The first aftermarket CAN bus immobiliser

The autowatch ghost installer ghost immobiliser 2 provides unparalleled security and is the only aftermarket CAN bus immobiliser in the world. It guards against key hacking or cloning, and even theft of keys. This is accomplished through a partnership with your vehicle's current interface. It doesn't require any additional remotes or fobs, but instead integrates with the vehicle's data network, CAN. This makes it a'silent gadget.

The device is an invisible circuit board that connects to your car's engine management system (ECU) and operates in a silent manner. Once activated, it will stop the car from starting unless you enter a PIN. This is a unique code that you will receive when you make an appointment for installation. This number will be required to enable valet mode, deactivate the alarm, or allow you to drive away in the car of a friend (if they have a Ghost installed too).

It is designed so that it is not spotted by anyone who is looking at your car's interior. does not transmit radio signals, and can only be heard when it's activated. It can be installed in a variety of places which makes it virtually impossible to identify. It is also a low-maintenance device and can be incorporated in conjunction with other systems like a tracker (Brand dependant) to offer the most complete anti-theft system.

Many people opt to install an immobiliser that ghosts because they believe that standard security isn't enough to protect their pride and joy from being stolen. Physical deterrents like wheel clamps and locking mechanisms for steering wheels are excellent options, but they are not considered "theft-proof" by thieves as they can be easily defeated with the proper tools. A bmw m3 ghost installer immobiliser is not an easy target for thieves since it is integrated into the vehicle and, if activated, will shut down the starter motor or the fuel system.

A ghost immobiliser is installed for just PS450 - a fraction of the cost of other products. It also helps stop your vehicle from being taken. If you're looking to add an additional layer of security to ensure your pride and joy is safe and sound Contact us today and we can arrange it for you. We can take card payments or provide three months of interest-free credit through Klarna.