• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

In Wall Fireplace - How to Choose the Right Height and Depth for Your Fireplace

A fireplace in the wall gives a sleek and polished look without the cost of mantles. It is among the easiest electric fireplaces to set up.

However, there are several factors to consider before purchasing your in-wall fireplace. To get the most value from your investment, adhere to these suggestions:.

Height

While it may appear to be an easy task to answer, determining the height of your new fireplace is among the most crucial decisions you can make. The height of your fireplace will affect everything from how it will fit into a space to its visibility. If your fireplace is to high could make it look unnatural and detract from the aesthetics of the piece. On the other hand, having your fireplace set too low could cause it to disappear in the wall space.

Electric fireplaces can be mounted at various heights. For instance, the majority of people choose to mount their fireplaces at eye level from a seated position. This typically requires a height of between 40 and 42 inches from the floor to the bottom of the fireplace. Some people mount their fireplaces under their TVs. This is an attractive alternative.

The size of your fireplace will depend on several factors, including the dimensions of the room as well as the length of the wall where you'd like to place it. The larger the space the more spacious it will be. This could mean that you're in a position to fit a bigger fireplace into it. The same goes for the length of the wall as a wall with a greater length can accommodate a larger fireplace.

Another important aspect to consider is how you intend to make use of your fireplace. If you are planning to use it solely to decorate your home, it is recommended to choose a lower height. If you're planning to heat your home using it, you'll need ensure that the fireplace is tall enough to meet local codes and safety standards.

It is important to choose the appropriate height for your fireplace so that it is in line with your decor and be simple to clean or fill. If you're not sure what best height to choose you can always contact an expert fireplace installer for help. They can suggest the best height for your fireplace, based on their knowledge and the design of your home's design.

Depth

The depth of a fireplace is crucial to consider if you intend to put it in a recessed location. If you're planning to cut your wall, ensure that you have enough depth to accommodate the interior design of your fireplace (the smoke shelf that is above the fireplace box, the flue which rises through the roof, and the fireplace itself). Also, think about the space you will have for the surround, and whether or not you would like a mantle.

Many of the more recent electric fireplaces have the depth of being almost invisible, creating an "integrated" appearance. This kind of wall fireplace that is electric is best exemplified by the Panorama BI Deep series. It has a 5.8-inch deep that allows the viewer see the flames, ember bed and not the frame. The media package includes driftwood logs with natural colors white pebbles, or crystals of clear glass to add a luster to the embers and reflect the flames.

Wall-mounted gas fireplaces wooden are available in both deep and shallow models. When determining the depth of your fireplace it is crucial to keep in mind that these fireplaces electric are supplementary heat sources and should be vented properly by a trained professional. When determining the size of gas fireplaces, you need to think about the length of the vent pipe and the size of the chimney.

It is crucial to read and adhere to the instructions of the manufacturer when mounting your fireplace. A professional installer is recommended in all cases. Also, it is always best to have an extra person available when installing gas fireplaces.

Addition of an in-wall fire space to your home is a fantastic option to enhance it and add ambience. It can also lower the cost of heating. Additionally, it's a great option if you aren't able to install traditional fireplaces wood in your home because of the space restrictions or the location of an existing chimney.

Surface Mount

If you're unable or prefer not to cut through your wall or construct an area to accommodate an electric fireplace A surface mount can give you a sleek and modern look. Certain models, such as the Allusion line of electric fireplaces, can be installed partially recessed into walls without compromising the output of heat.

To begin the installation, mark the wall with a pencil where the bracket is to be mounted. Utilize a stud locater to find the studs in the area. Make sure each mounting bracket will be placed in the front of one or more studs for stability. If a stud isn't within reach or won't work for your fireplace, use drywall anchors to support the mounting bracket.

After you've marked the position of the brackets to be mounted, use a drill to screw them into the wall, ensuring they are properly aligned with the studs. You can use studs or anchors made of plastic to secure each bracket. Once the mounting brackets are in place, lift your fireplace and place it from the wall bracket. Once the fireplace is in place be sure that it is level.

Before proceeding with the installation, connect your fireplace and check that all features are working correctly. Turn on the fire, and then ignite the flames, play around with the heat, ember bed lights and so on. Once you're happy with the results, it's time to install your floating mantel.

Based on the model of your fireplace, you'll either need to connect its wire connection to the appliance wire connector in the mantel's bottom or if the fireplace has slots or hooks on the back connect them to the slots on the wall mounting brackets. Once you've done this you must follow the owner's manual for specific directions on removing the front glass panel and installing it into the opening.

If you have to alter the height, replace the glass front once you have removed the front panel. If your fireplace is equipped with ember bed media spread it across the top grate to give it a more natural appearance. Then secure it with the screws that come with it.

Plug-In

Contrary to traditional wood-burning fireplaces these electric versions don't need chimneys or vents. Connected to a standard outlet, they provide supplemental heating to rooms that are up to 400 square feet. They also come with a variety of heating and flame settings, to allow you to customize your ambiance. Certain models come with LED lighting effects to highlight the flame and embers. Some models feature a grille on top that hides the manual controls, however they it can be opened easily to reveal buttons.

Electric fire places with plug-ins can be installed directly on the wall or recessed for an appearance of a built-in. These units are typically easier to install than a mantel fireplace. Some models include a pedestal to allow you place the fireplace on flat surfaces such as a dresser or buffet. Included are an remote control, mounting hardware, and log set. Depending on the model, these electric wooden fireplaces (linked web page) could include flame and heat options that can be turned off for year-round ambiance.

Some models have privacy glass that can be easily adjusted, from being fully transparent to partially transparent. This option makes these models popular for walls that separate common entertainment spaces like living and dining areas. These models are ideal in bedrooms, where adding an fireplace is a cost-effective way to warm up a room and ensure privacy.

Plug-in electric fire places don't need to be hardwired, but they must be plugged into an area that can support their weight. Certain models come with a kit to make this process easier, including a pre-wired power cord as well as a bracket for mounting. This kit can be used for drywall installation or concrete installation.

When choosing a location for your wall-mounted electric fireplace, ensure it's near an electrical outlet. Electric fire places with plug-ins can be connected to outlets that are on the same circuit as the electric fireplace or into a dedicated outlet. It is recommended to choose a different circuit, so that no other appliances in your home be powered by the same voltage. This could trigger your circuit breaker.