• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Allowing your cat to enter and go out of the home at its own pace is a good idea to keep it mentally and physically engaged. Having a flap can also aid in reducing toilet accidents by making it easier for your cat to leave the house whenever it wants to.

Take a measurement of the door

A cat flap allows your pet to come and go at their own pace, without having to open the door for them. This is ideal for keeping them in when you're home or away and helps keep unwanted pests out of your home too!

It is essential to examine the door's measurements to ensure you get the right size cat flap. There are many sizes available. This ensures that you get the correct size to fit into your door made of upvc otherwise, it could be too small or too large for your cat and he will struggle to use it.

Before you take any action, though, take a ruler and take measurements of the width of the door in a variety of places along its edges. Also, you should determine the door's height in a couple of places. This is because the door that is too high could cause your cat to do a gymnast's routine every time they need to use the flap!

Ask a glazier for assistance in case you're not sure what to measure for the door. They can determine if your door is suitable for cat flaps, and will give you advice on the right size flap to purchase.

Once you've got your measurements, the next step to do is mark the outline of the hole in the door. This will give you an outline to cutting the hole and will stop you from making a mistake that could cost you money in the end!

Make sure you make holes in the right place. If you are fitting a cat flap an apex flap to an outdoor door, it's crucial that the hole does not get too close to the hinges. This could lead to leakage or problems with the seal.

It is best to leave the installation of a cat flap on a glass door to a professional glazier. It can be difficult to insert a cat flap into the glass pane and you could find that the process causes it to break and lose its weatherproof seal.

Measure the Cat

A cat flap lets your pet to go and come whenever they like without having to leave them on their own. It can also help to stop the draughts from entering your house, which aren't good for either you or your cat!

If you own a uPVC door or composite, it may be difficult to install the cat flap. These types of doors are often made from different materials than standard wooden or uPVC doors and the process of installing them is quite different too. Make sure you check with the manufacturer to see if it is compatible before installing an uPVC cat flap on your uPVC composite or uPVC door. Alterations may cause warranty issues.

Generally speaking, these kinds of doors are designed to be durable and tough and have insulation built-in. This makes them more resistant to the elements of weather than other types of doors, but they can be a challenge to insert the cat flap. Consult a professional before installing a cat flap on the uPVC door or composite.

To make sure that your cat can get through the door, you'll have to measure their height. It is easiest to measure their height when they're calm or asleep, so that they aren't moving around. Once you have their height, you can measure the distance between their stomachs and the floor to determine the position of the bottom of the flap. This location is marked on the door.

If your uPVC or composite door is made from metal (either aluminium or steel) you'll need to be very careful when cutting it using power tools. Cutting into metal can cause cracks, especially if the area is made of toughened glass. This is why it's highly recommended to employ a glazier when installing your cat flap inside a pane of glass. This will prevent the glass from breaking and becoming fragile. A glazier will also be in a position to provide you with a cat flap that is less likely to break and is safer for your cat flap cover for winter to use.

Cut the Hole

A high-quality cat flap should come with a template that can be used to mark the area on your door where the hole should go. If it doesn't, create your own by with a thin piece of paper (tracing papers are ideal). Once the shape has been drawn on the door, use your spirit level and make sure it's horizontal. This will ensure that your cat flap sits properly in the opening, and it will not slide open or close.

Then, you can make use of a jigsaw to cut out the shape marked on the door. Make sure that you are using a blade that is suitable for use on uPVC doors - usually it will be labelled accordingly however, if not, ask the staff at the DIY store for guidance. After the hole has been cut and the flap is placed against it and then open it to make sure the flap moves smoothly. If it becomes stuck at any point, use a filer or rasp to fix this.

Make sure there aren't any electric or gas pipes within the door you plan to cut through. Your jigsaw could cause damage to them. Also, be aware of any handles or other fixtures that are on the door that have to be removed to fit the cat flap. Be cautious not to damage these items during the process.

Most people who fit the cat flap themselves have an ordinary solid uPVC door, and therefore won't have to deal with any of these issues. If your door is made of wood or has a decorative part that is not easily removed, it will make the job.

For these kinds of jobs, it is worth getting expert guidance from a cat-flap fitting a cat flap in a Upvc door expert. It is important to complete the job correctly to avoid future problems. Making the wrong choice could lead to the door being damaged, which could make it impossible to honor the warranty.

Install the Flap

Once you've got your hole cut, put the flap on to see if it fits and can be opened easily. If you spot any areas that stick or catch, file them down with the aid of a hand file or sandpaper until it is a perfect fit and opens without issue. Make sure the flap sits perfectly flush with the door.

If your kit doesn't include templates, you can use tracing paper that is thin, such as a piece of paper or acetate. Place the paper on the door and draw a line in order to indicate the location where the flap is placed (this will serve as your cutting guide). Then, using the pencil lines you've drawn on the door, mark four screw holes in each corner of the flap - these are the screw holes that you'll use to secure it into the right position.

Most uPVC door are solid and easy to cut. If your door is made of composite or GRP the process can be more difficult. If you're not comfortable with this, it's best to hire an expert. They will also be able tell you if your door is suitable to install an animal flap.

You can install the cat flap onto composite doors. However, it's essential to check with the manufacturers or a professional joiner before you do so because any changes to these types of doors could void the warranty. If you do decide to complete the task yourself, be aware that it can be messy and possibly hazardous task.

With composite doors, you'll usually need to use the aid of a saw or grinder to cut through the door's frame rather than simply through the GRP. Be aware that this could be a very hazardous job and you'll need to take great care not to hurt the door or yourself since it is extremely fragile. It's also important to note that cutting a hole into any type of glass for a door is far more difficult than making the same change in a upvc door panel replacement cat flap or solid wood door.