• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Why is My Car Ignition Locked?

There are a variety of reasons your ignition could be stuck. One reason is that the key is dirty or has a damaged wafer inside it. This can be corrected by sliding the key into and out of the cylinder multiple times.

Another possibility is that the pins in the lock cylinder have become stuck. You could tap the cylinder lightly using a small tack-hammer.

Check the Battery

If your car is in Park or neutral, but doesn't come on when the key is inserted into the ignition, it may be a problem with the shifter switch on the transmission. This can be easily solved by moving the switch upwards or downwards to get the car into the gear.

If the car still won't turn, the issue could be related to the neutral safety cable or the shifter on the transmission. A mechanic or a local auto locksmith can easily solve these problems.

The ignition cylinder can also be worn out. Over time both the ignition and key can become worn out and become difficult to insert or remove. A lubricant such as silicon lock lubricant can help solve this problem by allowing the wafers to slide into the place.

The filth from your pockets and adhesive from the tape that holds packages together can also build over the key, which prevents it from sliding into the ignition and key replacement. Clean the key with a cloth, or a cleaner like Triflow, to solve this issue. You should also use a spare key to determine if the issue is related to the key or the ignition.

You can also try to tap the key with a small hammer, when it's in the ignition. This will create a slight vibration that might be enough to loosen the wafers in the ignition, allowing them to slide in place. However, you should be careful not to scratch the key or the ignition cylinder.

If all of the above solutions fail, it's probably time to call a locksmith or automotive mechanic to examine the issue. The key might be broken inside the lost ignition key cylinder or it could be the time to replace it all. If the issue is with the key the locksmith can make a new one for you. If the ignition cylinder is the cause then you'll have to bring the vehicle to a repair shop for it to be replaced. These issues are usually simple to repair.

Check the Steering Wheel

A simple problem that can hinder the ignition from turning is a locked steering wheel. This occurs when the driver accidentally engages it when they exit or enter the vehicle. This is typically caused by pulling on the wheel and securing themself against it with their hands. It may also happen when an individual in the back seat is unable to stop it when they get out of the car.

This is a quick solution that doesn't require a trip to the mechanic or locksmith. First, make sure that the gear shift is either in neutral or Park. If it isn't, simply push or pull the shifter gently until it moves into one of these positions. It is also essential to press the brake button or activate the handbrake prior to attempting to turn the key.

If the wheel isn't locked, a quick examination of the steering column will confirm that the key is engaged with the lock cylinder. This is usually indicated by a small "Lock" label in the lower area of the ignition circle. It is easily removed by gently jiggling the lock or pulling it back with moderate force. It is crucial not to apply too much force as it could damage the key or even cut off a wafer within the lock cylinder.

Another thing to try is using an alternate key to see if it can disengage the lock. This could mean that the original key has damaged and no longer able to engage the wafers that make up the lock cylinder. A professional at Karl Chevrolet Webster City can create a new key in the event that this is the case.

If the key does not engage after spraying penetrating lubricant, it might help. Simply spray a tiny amount around the ignition, and the keyhole that you have inserted, and then gently tap or jiggle it until it starts to engage. If this doesn't work, you will likely have to visit a specialist at your local dealership for cars. They can provide you with a new key and also replace the ignition cylinder in case of need.

Check the Key

It could be that your key is damaged if it does not engage in the ignition. Try taking off any foreign material on the key (lint, adhesive from packing tape, etc). You should also try rubbing alcohol or Goo Gone on the key to see if this aids.

If the pins within the lock do not move properly when you insert your key, it's possible that they are stuck. You can test a spare key by gently pulling it out of the ignition after having put it in. This should let you feel and hear if the internal lock pins move, as they ought to. If you don't hear or feel any movement, you could grease them with graphite. You can buy graphite in small tubes which can be sprinkled into the keyhole. This will allow the pins slide into place when you insert the key and keep them from becoming stuck.

A more serious issue with your key could be that it has damaged or worn out, making it unable to connect the internal pins inside the ignition cylinder. This could cause the ignition cylinder to not turn and prevent you from starting your car. In this instance you'll have to take your vehicle to an auto repair shop or locksmith for assistance.

If you're able to turn your car on with a spare key and you've ruled out any issues with the battery or steering wheel it could be because the ignition cylinder is worn out. You can attempt to loosen the lock cylinder by using the blunt end of a screwdriver or the handle of a Hammer (not the head). A gentle tap on the cylinder can often release it which allows you to turn your key and start your vehicle. If this does nothing then you'll need the lock cylinder replaced by an expert mechanic.

Check the Ignition Socket

The ignition socket is where your key is inserted and removed when it is inserted. It can get clogged up with debris, or simply wear and wear and tear. You can squirt some silicon lock lubricant into the ignition.

You can also use a small hammer to very gently tap the inside of the ignition cylinder to try to loosen or reset the pins that may be out of alignment. Be cautious not to overdo it, or you could cause severe damage to the ignition switch.

It is essential to ensure that your car's gearbox is set to park or neutral before you attempt this. Many newer cars have the ability to lock the steering wheel when it is not in park or neutral that can stop the key from being turned into the ignition.

If you have done all of the above and still cannot get your key to rotate it is likely that the ignition cylinder housing needs replacement. Different vehicles have different procedures for replacing the ignition cylinder, therefore it is crucial to follow the correct procedures.

This typically involves removing the plastic cover that covers the steering column and ignition assembly. To remove it, you'll have to adjust the tilt-wheel to its lowest position. Then, loosen any fasteners holding it in place.

Once the cover has been removed, you'll have to remove the old ignition cylinder from the steering column. Then, you will need to compare the new ignition cylinder you purchased with the one that was removed to ensure that they are identical. Following this step, you can install the new ignition cylinder the same way as the old one.

It is possible that, despite our best efforts, the ignition may become damaged and require to be replaced. It is recommended that when this happens, you contact an Tempe Locksmith. A locksmith can help you select the best replacement and install it correctly so that your vehicle can begin again.