• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

uPVC Window Handle Replacement

Over time, window handles get damaged or worn out because of regular usage and exposure to elements. In such instances, replacing the handle is the best choice.

Upvc handles are available in a variety of styles and sizes. Older windows had cockspur handles that came in a variety of steps heights. Modern windows come with an espag handles with standard 43mm centres as well as 2 fixings. Make sure you check the spindle on your current handle to make sure that you are getting the correct size.

Removal of the Old Handle

uPVC handles are made to last for a long period of time, but can break from heavy use, aging, or exposure to the elements. Thankfully, replacing them is an easy and cost-effective option. Installing your new handle correctly requires the use of the correct tools and following the correct steps.

Be sure to check that the handle you're buying is compatible with UPVC window features and design. Check that the screw holes and the spindle length match and that the handle operates smoothly when you turn it to engage the lock mechanism. Test the handle by turning it around and make sure that it opens the window and closes it easily.

To replace a window handle first, open the window to gain access to the frame. Look for screws securing the handle to the frame, typically, they are located above or beneath the handle. They are secured by plastic screw covers or caps. With a screwdriver that is flat, gently pull off the covers and reveal the screws underneath. After removing the screws, you can remove the screws that attach the handle to frame and then the handle. When you remove the handle, be cautious to avoid falling and damaging the glass.

Note the location of the spindle (the metal bar that runs through the middle of the window handle lock handle) when you remove the old handle. This will be crucial when you install your new handle.

The length of the spindle is usually printed on the base or in the packaging of the UPVC handle. Spindle length is the measurement between the spinel of the handle and the base. It also measures how much the spinel extends into the UPVC glass. You may also want to measure a different handle in the same window to determine the length your new UPVC handle should be. Ideally, the handle should be identical to the previous one. Otherwise, the handle won't fit correctly and may break.

Measure the Spindle

It is crucial to select the right replacements for your window handles, whether they are broken or showing signs of wear. The wrong handle can impact the performance of your window and increase the possibility of glass breaking. The most important aspect to consider when choosing the best double glazing window handles for your home is the length of the spindle. This is the spindle length that protrudes out from the handle base, or the distance that the spine extends into the frame. The best method to determine what kind of handle you require is to examine the spindle of a handle that is already in place.

There are several different types of handles made of upvc each with its own unique characteristics. Some upvc window handles tilt and turn window handle loose the window, whereas others have a locking mechanism to prevent children or intruders from opening it. Some feature a cranked design that gives a greater hand clearance, or can be installed inline instead of having to be fixed to the frame of the window.

It is essential to take into consideration the step height when you choose the handle you want to use for your upvc windows. The step height will determine the type of handle that you will need to install. The typical step height of a uPVC window is 21mm, whereas timber and aluminum windows have a lower height of 9mm.

The spindle is a metal bar that is inserted into the middle of the handle and into the lock mechanism of the uPVC windows. It is important to check the size of this spindle prior to purchasing the handle for the first time, as a smaller diameter can result in the handle not fitting correctly. This can lead to the lock being damaged or inoperable, and the handle not being able to open the window.

It is important to use a small piece of equipment to measure the spindle. A pencil or a piece paper is ideal. This can be used to compare the measurement of a brand new window handle made of Upvc to make sure that it fits in your window.

Installing the new Handle

Depending on the kind of handle, you'll need to replace it with one that matches the decor and ironmongery of your home. You'll want to think about whether the handle you're replacing works with your window, and the way it will be used.

If you're replacing a tilt-and turn handle, ensure you purchase one that is able to unlock either way. It is important to get the left-hand or right-hand handle, since if the wrong one is installed, it could cause problems with opening windows and restrict airflow.

To remove the old handle, start by finding the fixing screws or pins which hold it in place. They are typically located on the inside of the window handle. They can be removed with the help of pliers or a screwdriver. After they've been removed, the handle should fall off easily. If it's not able to come off easily, apply some force to pull the handle off the spindle. Then, you can remove the handle completely from the window.

If you are buying replacement handles, make sure that they are the same step height as your existing ones. This is the amount that the handle nose protrudes from the back of the handle base and is measured using a ruler or a tape measure. The measurement of the spindle is vital. It can be done using a ruler or tape measure. It refers to the distance between the handle spindle and the frame of the windows.

The handles of cockspur and espang come with an average backset of 43mm centres (2 fixings). But, you'll need know what the original size of your uPVC windows is to find the correct replacement handles for them.

In general, uPVC handles can be either in-line or cranked. In-line uPVC handles are straight and can be rotated left or right. Cranked handles are only functional in a specific orientation. Take into consideration the window's orientation and your personal preferences when selecting a new uPVC handles. If you like the appearance of a chrome or brass double glazing window handle, you can find a similar design for your home by purchasing a handle that has the same look as the existing uPVC windows.

Test the Handle

There are a wide range of handles for uPVC windows, which is why it's important to find the perfect one for your needs. Choosing the best handles will ensure that your windows are safe and comfortable to operate, making sure you get the most benefit of your double glazed window handles-glazing. It's important to select a handle that matches the style of your window and is compatible with the locking mechanism you have.

Espag Handles

The most well-known type of uPVC handle is the Espag handle, which comes with locks inside the handle itself. This makes it difficult for burglars to open the window. There are two kinds of Espag handles: inline and cranked. Inline Espagnolette handles have a rectangular flat shape. They feature a spindle that flows through the handle and connects with the locking mechanism of the window frame. Espagnolette handles with a curved or angle design function similarly to inline handles.

If the window handle you have is broken, you'll have to replace it with a brand new one. There are numerous replacement options available on the market, so it's crucial to choose the perfect handle for your window and suitable for the locking mechanism you have in your home. It's also essential to select a handle that's made from high-quality materials, as this will increase its longevity and resistance to the elements.

It's essential to check your windows on a regular basis to ensure they're functioning well and that you're not losing energy or heat. Do not hesitate to call an expert if your uPVC window needs to be repaired. They can provide you with the best solution for your home, and offer a quick and cost-effective solution.

Changing the handle on your uPVC windows is a simple process that takes only a few minutes. By identifying your handle type and determining the spindle size, and using the right tools and equipment to make sure that your window is properly secured and comfortable to use.